I'd think about the USB-C adapter as the first thing to try and replace, but you may also want to try with a different, shorter, USB cable between the Targus and the adapter.Ī separate issue is with the monitor. USB 3 is difficult hardware-wise because of both higher speed and more advanced power management so looks like something is borderline in your use case and fails. In the system log you can see transfer and wake errors in both USB2 and USB3 devices and then only the USB2 part of the hub is reset while the USB 3.0 part of the hub is longer there, together with the DisplayLink device. In the DisplayLink logs this is shown as transfer errors and device unavailable.
The main issue is visible in both the DisplayLink and the system logs: at some point the USB 3 part of the hub in the Targus dock disappears. OK so the USB-C device is used as a C-to-A adapter and everything is connected to the Targus dock, which is handy so there's only one cable to connect. Let me know if you want me to do anything else. Plus, I've attached logs from that DisplayLink tool in the working and not working scenario. Alright, see below links for some photos of the setup.
0 kommentar(er)
